You are here

Home

PC-150 Charger

Lead Acid Battery Charger

6, 12, & 24 VDC; 0.2 to 2.0 Amps
PC-150 Lead Acid Battery Charger, 6, 12 & 24 VDC , 0.2 to 2.0 Amps
[+]Enlarge

Applications

  • Charges lead acid batteries
  • Optimally designed for batteries up to 25 Ampere Hours
PC-150 Data Sheet

COTS Charger Information

Features

  • Temperature compensation
  • Three stage charger
  • LED displays for charging status
  • Single battery charger
  • Unattended charging

Operatinal Characteristics

  • Three stages of operation
    • Bulk charge mode – replaces 80% of the charge to the battery from a  discharged state – 6 hour time limit
    • Absorption mode – a tapering current replacing the final 20% of the charge to the battery – end current is a pre-programmed value
    • Float mode – maintains the battery’s float voltage.

 

Model No PC-150
AC Input Range 110 VAC to 130 VAC; 60Hz
Battery Charge Voltage 6 VDC, 12 VDC & 24 VDC Nominal
Battery Charge Current

• 0.2 to 2.0 Amps at 6 VDC & 12 VDC (factory set)
• 0.2 to 1.5 Amps at 24 VDC (factory set)
Charger Power Out 50 Watts max.
Charger Indicators

LED Indicators:

• Solid green LED - No battery connected, charger on
• Solid yellow LED – Charging
• Solid green LED – Battery connected, float charge mode
• Solid red LED – Battery VDC less than 5.0VDC or connected in reverse
Weight 2.7 lbs. (1.2 Kg)
Dimensions 5” x 3 1/2” x 2 1/2” H (13cm x 9cm x 6.5cm)
Mounting 4 each #6 screws
Recommended Battery Charging Temp 10°C to +27°C (50°F to +80°F)
Operating Temp 0° C to 50° C (32°F to 122°F)
Storage Temp -40° C to +70° C (-40°F to +158°F)
Humidity 95% relative
Color Black, annodized
Charger Housing Extruded aluminum body, polycarbonate end caps
Harmonized Tariff Code 8504.40.9550
  • Flooded/wet lead acid batteries
  • Valve Regulated Lead Acid (VRLA) batteries
  • GEL lead acid batteries
Authorized Reseller and Distributor for PATCO Electronics Products.