You are here
PC-8500 Charger
Nickel Metal Hydride and Nickel Cadmium Battery Charger
2.4 VDC to 24 VDC (2 cells to 20 cells); 0.2 Amps to 5.0 Amps; Dual Output
![[+]Enlarge](http://www.crtes.com/sites/default/files/PC-8500.jpg){kind=link}
Applications
- Charges Nickel Cadmium (NiCd) and Nickel Metal Hydride (NiMH) batteries
- Optimally designed for batteries up to 40 Ampere Hours
COTS Charger Information
Features
- Battery temperature monitoring capability
- Four stage charger algorithm - microprocessor
- Full charge based on zero slope voltage detect or rate of temperature increase
- Microchip controlled charge termination
- Programmed for specific cell count and capacity
- Dual LED displays for charging status
- Dual battery charger
- Dual independent battery charging
- Unattended charging
Operatinal Characteristics
- Four stage algorithm operation
- Soft start charge mode – the current increases gradually over the first two minutes from approximately one fifth of the bulk charge current up to the factory set bulk charge rate
- Bulk charge mode – current is supplied to the battery at the rate programmed into the charger for the specific battery pack
- Topping charge mode – current is supplied for two hours at a C-10 rate to complete the charge cycle
- Maintenance charge mode – current is supplied at the C/40 rate until the battery is removed
| Model No | PC-8500 |
|---|---|
| AC Input Range | 95 VAC to 265 VAC; 50/60Hz |
| No. of Cells/Nom. Battery Voltage |
2 cells to 20 cells / 2.4 VDC to 24 VDC (factory set) (per output) |
| Battery Charge Current |
• 0.2 to 5.0 Amps (factory set) (per output) |
| Charger Power Out | 80 Watts max. (per output) |
| Battery Connection | XLR 6-pin connector; located on front Output 1: Pin 1: Positive (+); Pin 2: Negative (-); Pin 3: Thermistor In Output 2: Pin 4: Positive (+); Pin 5: Negative (-); Pin 6: Thermistor In |
| Charger Indicators |
LED Indicators: • Solid red LED – Charger on, ready to charge, no battery connected |
| Weight | 3.5 lbs. (1.6 Kg) |
| Dimensions | 8” x 5.6” x 3.0” H (20.3cm x 14.3cm x 7.6cm) |
| Recommended Battery Charging Temp | 0°C to +45°C (32°F to +113°F) |
| Operating Temp | -30°C to +40° C (-22°F to +104°F) |
| Storage Temp | -40° C to +70° C (-40°F to +158°F) |
| Humidity | 95% relative |
| Color | Black, annodized |
| Charger Housing | Extruded aluminum body, polycarbonate end caps |
| Harmonized Tariff Code | 8504.40.9550 |
- Nickel Cadmium Batteries (Ni-Cd)
- Nickel Metal Hydride (Ni-MH)
Authorized Reseller and Distributor for PATCO Electronics Products.